 
      Product Details
Payment & Shipping Terms
1.Details
 	
   
 	
   
2.Technical Parameter
| Specification | |
| Number of feeders | 80 | 
| Number of IC tray | 8 | 
| Number of cameras | 10 | 
| Number of heads | 8 | 
| Average power | 1000W | 
| Automatic board | Three-stage track | 
| Guide | Screw guide | 
| Maximum mounting speed | 15000 Pcs/h | 
| Average mounting speed of actual mounting resistance | 12000 Pcs/h | 
| Maximum travel scope in Z axis | 20mm | 
| Maximum circuit board area | 500×455mm | 
| Positioning precision | 0.01mm | 
| The buffer range of suction nozzle | 4.5mm | 
| Weight | 600KG | 
| Dimension | 1420*1370*1350mm | 
| Power supply | 110V/220V, 50/60Hz | 
| Compressed air | 0.5-0.6Mpa | 
| Drive motor | Panasonic servo motor | 
| Motion drive system | Panasonic high-speed DSP drive | 
| Recognition mode | Simultaneous recognition of eight heads | 
| Vacuum source of suction nozzle | High-speed on-off vacuum generator with vacuum breaker | 
| Operating system | Full-automatic chip mounter operating system operating system. | 
| Independently developed by us based on Windows operating system | |
| Supports windows xp, win7 | |
| Element angle | 0-360°synchronous rotation during movement | 
| X/Y operation mode | Intelligent curve of the linear acceleration and deceleration linkage | 
| MARK point positioning | Full-automatic (the MARK point can be adjust at will) | 
| Intelligent alarm | Automatic correction, automatic filling, feeding shortage alarm | 
| Plate entering mode | Automatic connection from left to right in single sections | 
| Automatic PCB transfer positioning/plunger positioning, manual plate feeding | |
| Visual display | 17-inch industrial control display, 4:3, resolution: 1280 x1024 | 
| Number of recognition cameras | One Mark recognition camera, four quick-recognition cameras | 
| One precise-recognition camera. | |
| Adaptive mounting scope | Adaptive to 0201 0402, 0603, 0805, 1206, diode, audion, SOT, QFP | 
| Within 40*40mm and the pin distance ≥0.3mm (0.5mm center distance) and BGA. | |
 	
   
3. 8 Placement Heads
 	 
  
4.Screw
 	
   
5.10 Cameras+Conveyor
 	 
  
 	6.Three section track
   
 	
   
7.Application area
 	